Frequent questions

Gelcoat is the coating sprayed up against a highly polished mold at the beginning of the fiberglass lay up process. The process results in the smooth, mirror-like finish typical of new boats. With the passage of time, unprotected jelcont will oxidize and eventualy take on a chalky apperance. As part of this process, it becomes porous. The more porous it becomes, the more reality it will stain. The process continues until the boat becomes one of the dilapidated wallflowers that we have seen at the dock. The good news is that nearly all gelcoat can be restored, provided it is not completely worn through.

Ceramic coating for boats is a special kind of liquid polymer that is spread over its surface to make a protective barrier. This protective coating shields the boat from things like UV rays, salt water, and environmental toxins, which can damage the boat and make it look old over time.
These type of coatings are different from wax or sealant because it sticks to the surface of the boat much more strongly and protects it for a longer time. On the molecular level, it penetrates those minor peaks and valley’s found in all porous surfaces.
The coating will fill those holes, harden, and leave an exceptionally flat and smooth layer of hard, but flexible glass. The next result is a level of gloss that can’t be matched by any other protective solution.
Most of the time, boat ceramic coatings are made differently than other nanoceramic coatings. Ceramic coatings for boats are made to protect hulls made of fiberglass or gelcoat.
Professional-grade marine coatings are usually thicker than DIY coatings and require professionals to have a lot of training to put them on right. Prior to installing, most experts will complete paint correction, to remove any oxidation, faded paint, or imperfections.

The polishing process at Ultimae Marine Detailing involves a few key stages. Firstly, we start with a thorough cleaning to remove dirt and surface contaminants. The second stage involves using a high-grade marine-specific compound to remove oxidation and minor scratches. The third stage is the polishing itself, where we use a high-quality polish to restore the gelcoat's shine and protect it from future damage. Lastly, we do a final inspection to ensure your boat meets our high standards of quality and finish.

The duration of boat polishing largely depends on the size and condition of the boat. A smaller boat with minor oxidation may take two-three days, while a larger vessel in need of significant restoration may require more days. However, at Ultimae Marine Detailing, we pride ourselves on our efficiency and will always provide an accurate time estimate before beginning the work.

Upon consultation, we also serve other regions of the country.